4wd Robot Car Chassis Kit with Metal Robotic Frame & 4pcs TT Encoder DC Motor for Arduino / Raspberry Pie / Microbit, DIY Remote Control Mobile Moving Robotics Platform for Maker Education Spy Monitor

• Improve the Hands Ability: This 4wd robot car chassis is a good helper for DIY makers. The car chassis is NOT assembled, but it is not difficult by the attached simple manual. It is also a great interesting to assemble this robot car chassis, and also be helpful to improve the robotics operation ability, and can know the Mechanical structures on the robot car chassis kit, which includes frame, engine motor.
• Robot Controller Leaning: Controller is the core of the robot car. After get this chassis and install it, you can know the the robot controllers knowledge, like arduino uno, raspberry pie, microbit, stm32, and many other main control boards. Moreover, you will also know the motor shield board, and other sensors. Thus, it need you spend much time on them.
• AI Robot: AI is now the most hot topics. So, based on this basic robot platform, you also can know the AI knowledge. For example, voice control this robot car chassis, automatic driving by installing the many sensors. In the our document, we provide the referred arduino code for arduino projects.
• Metal Frame: This car frame kit is equipped with metal frame, which is not easy broken similar to the acrylic plate. And the car panel is sandblasting oxidation. So, it is very beautiful, then you can much more interest on it. Note that, the reserve holes is just consider on the arduino, nodemcu, and raspberry pie. So, maybe some sensors are not very suitable to assemble. But there are some many ways to install it. Thanks.
• What You Get: You will get; 1pcs * metal platform, 4* wheels, 4* TT motors with encoder and 1set * screw kit, please check the “shipping list”.If there is any problem, please dont hesitate to contact us. We will reply you with 24 hours.

Introduction To make the car move, we need to convert electrical energy into mechanical energy, and finally become the kinetic energy of the car. The kinetic energy of the car is provided by four DC motors, and the motor drive module controls the motor movement. The module is connected with Arduino uno or other controllers and is responsible for receiving signals to drive the motor movement. Of course, it is indispensable to provide enough power for the drive module. In the 4-drive car, all the power is provided by two 18650 lithium batteries, This system is called motor drive system.

Product Parameters
Product Name: C101
Panel material: 2mm aluminum
Product Size: 175 * 137 * 69mm
Product weight: 0.37kg
Load weight: 0-2kg
Motor type: 1:48 reduction ratio TT motor
Wheel: 65mm rubber plastic wheel

Wheel and TT motor Parameters
Product name: 65 rubber wheel
Voltage 6V (recommended at 3-6V best)
Motor specifications (choose one):
Voltage : 6V
no-load current : 250mA
no-load speed :24010% rpm
Voltage : 3V
No-load current : 170mA
No-load speed :11010% rpm
Reduction ratio: 1:48
Reference wheel weight: 41g
Reference motor weight:28g
Package Included
Chassis: 1pcs
TT motor: 4pcs
Wheels: 4pcs
Screw Accessories: 1 set
TT Motor Parameters :

Note
The reduction ratio of the TT motor is 1:48 by default.
In order to facilitate transportation, the product is not assembled.
More documents can be downloaded at gitnova.com.
This car chassis is UNASSEMBLED for get the DIY interest.